Magazine Archive

Home -> Magazines -> Issues -> Articles in this issue -> View

Chain Reaction

Article from Micro Music, October/November 1989

John Renwick gets his axe out and processes it with the aid of this rack-mount unit from Digitech


John Renwick explores the world of guitar effects with the aid of a MIDI-equipped signal processor from Digitech


One of the most attractive aspects of MIDI is that though it was designed to allow keyboards and computers to communicate with each other, it can also be applied to many other forms of music-making. Drummers, wind-instrument players and sound engineers all now use MIDI, and, of course, so do guitarists.

The most familiar application of MIDI for guitarists is in "guitar synths", which use guitar-like controllers such as the Yamaha GS-10 to play synthesiser sounds. But these instruments tend to be expensive, and most guitarists are happy to stick with their conventional electric guitars, and enhance their sounds with effects units.

The DigiTech GSP-5 is a combined pre-amp and programmable effects unit which lets guitarists make the most of MIDI without adventuring into the sometimes baffling world of synths and samplers. Rather than forcing guitarists to rely on a pile of little battery-powered boxes for their effects, the GSP-5 aims to provide a complete "signal-processing" system in one unit. But it also allows the guitarist to "interface" with hi-tech computer and keyboard systems using its MIDI facilities.

Compared to competitive units such as the Korg A-3 and Roland GS-6, the DigiTech GSP-5 is reasonably priced at £549. The UK distributor, John Hornby Skewes, is aiming it at the sort of guitarist who might be willing to pay around the same amount of money for a guitar, such as their latest Charvel (the three-pickup £375 Deluxe) shown in the photos.


Hardware



The GSP-5 is a 1U high 19" rack-mounting unit, but it has little rubber feet so you can also use it in a freestanding mode.

It comes supplied with a three-button footpedal unit which is connected to the back using a cable provided. The three buttons on this box allow you to bypass the effects unit (temporarily disable the effect) or to change program memory up or down. As we'll see, it's also possible to make more creative use of foot control via MIDI. There's a single mono audio input on the back, which is duplicated on the front. However, output can be in stereo. There are two sockets on the back - and many of the preset programs make use of impressive stereo panning effects. MIDI IN and OUT/THRU sockets are also in evidence and rotary Input/Output level knobs and signal/clipping LEDs are on the front.

The GSP-5 has 99 programmable non-volatile effects memories. The current program is displayed on a two-character LED on the left of the front panel, while the LED on the right displays parameters and values which allow you to edit the preset programs as you desire. Each preset can use up to nine different types of effect simultaneously. These include short delay, long delay, distortion, reverb, flanging, EQ and so on. Flipping through the presets with the foot controller or front-panel UP/DOWN buttons, you'll see that the matrix of nine labelled LEDs shows which effects are in use in the current program.

Effects chains



The effects are combined in a selection of thirteen Effects Chains, some of which are simple, such as Reverb/Amp Voicing (simply the selection of Left, Right or Both output channels); while some are more complex, such as Low-Pass Filter/Delay/Reverb/Chorus/Voicing. When creating your own effects, having chosen an Effects Chain, you can then change the parameters of each separate effect. Each parameter is given an abbreviation on the programming LCD; for instance "dL" for Delay Level. Some effects have only a couple of parameters, such as Distortion, which features Level and "Balls" (!). Others have several; Reverb, for instance, has Early Reflection Level, Room Volume, Normalised Reflectivity, Damping, Diffusion, and several more!

The GSP-5 has excellent sixteen-bit sampling quality, and frequency response is 20Hz to 20KHz; the result is a stunning selection of effects, from warm distortion to howling feedback, huge reverb, clean delays, subtle choruses, swooshing flanges, and a range of impressive imitations of popular amplifier sounds. The manual gives the preset effects names such as Arena Sound Check, Dragon Queen and Animal Flange; it's just a pity that unlike units such as the Alesis Quadraverb, the LCD display of the GSP-5 doesn't allow these names to appear on the effects unit.

By the way, although your edited versions of the presets can be stored in the unit, or dumped via system exclusive messages to any MIDI data recorder, you can always restore any or all of the factory presets with a simple control sequence.


Continuous controllers



The GSP-5 can respond to MIDI messages on any selected MIDI channel, or on all channels in OMNI mode. It recognises two types of MIDI information; program change and continuous controllers. Obviously, program change messages, whether sent from a keyboard or a sequencer, will only select a new pre-programmed effect on the GSP-5, from 01 to 99. Continuous controllers are a bit more complicated. The MIDI standard includes 127 "continuous controller" numbers, which allow MIDI units to transmit and receive real-time performance information. Some of these have agreed functions, such as Portamento Time or Tremolo Depth; others are undefined.

On the GSP-5, any effect parameter can be controlled by any continuous controller; in other words, using a sequencer or the required foot-pedal controllers, you can alter functions such as the number of repeats in a delay, the amount of distortion or the setting of a filter, as you play the guitar. The DigiTech PDS-3500 or PDS-1280 MIDI pedals send MIDI program change messages, but for continuous control you'll need the DOD FX-17 Volume/Controller pedal too.

Connecting up and programming the system is a bit complex; the mains-powered FX-17 generates a control voltage of 0-5 volts, and is connected to the PDS-3500, which converts this into MIDI messages which the GSP-5 can understand. To program the PDS-3500 MIDI pedal you first set its channel number, then choose a program number, then a MIDI continuous controller number, and store this as a preset. The PDS-3500 plugs into the MIDI IN of the GSP-5, then you must program the GSP-5 to respond to the MIDI continuous controller information. Press the MIDI button; select the required MIDI channel; then, using the left/right cursors, select the effect parameter you want to control. The up/down buttons are then used to assign a continuous controller to that parameter.

Sound Results



It sounds complicated, but the effort is worth it. The complete set-up allows you to link in your guitar system with a computer or keyboard. You could, for instance, program a sequencer in such a way that it selects the guitar effect, and type of foot-pedal effect control, for each part of a song, or indeed for an entire live performance. Since the alternative has traditionally been a frantic race to stomp the right selection of half-a-dozen pedals in between songs, without pulling out any leads with your foot, it looks as if the GSP-5 proves that MIDI has saved the day again!

Product: DigiTech GSP-5 MIDI Guitar Effects unit
Price: £549
Supplier: JHS, (Contact Details)



Previous Article in this issue

Pandora's Box

Next article in this issue

Turbo Charged


Publisher: Micro Music - Argus Specialist Publications

The current copyright owner/s of this content may differ from the originally published copyright notice.
More details on copyright ownership...

 

Micro Music - Oct/Nov 1989

Scanned by: Mike Gorman

Gear in this article:

Guitar FX > Digitech > GSP-5

Previous article in this issue:

> Pandora's Box

Next article in this issue:

> Turbo Charged


Help Support The Things You Love

mu:zines is the result of thousands of hours of effort, and will require many thousands more going forward to reach our goals of getting all this content online.

If you value this resource, you can support this project - it really helps!

Donations for March 2024

Please note: Our yearly hosting fees are due every March, so monetary donations are especially appreciated to help meet this cost. Thank you for your support!

Issues donated this month: 0

New issues that have been donated or scanned for us this month.

Funds donated this month: £208.00

All donations and support are gratefully appreciated - thank you.


Magazines Needed - Can You Help?

Do you have any of these magazine issues?

> See all issues we need

If so, and you can donate, lend or scan them to help complete our archive, please get in touch via the Contribute page - thanks!

Please Contribute to mu:zines by supplying magazines, scanning or donating funds. Thanks!

Monetary donations go towards site running costs, and the occasional coffee for me if there's anything left over!
muzines_logo_02

Small Print

Terms of usePrivacy